Diaphragm Amplifier

Diaphragm Amplifier

The F-4014-Series Diaphragm Amplifier is a miniature interface device that performs the same function as a piloted three-way valve, but at low outlet flow rates.

CHF 90.15 (excl. VAT)

Délai de livraison : 2 à 4 semaines
Contactez-nous pour des délais de livraison plus courts UGS : ND Catégorie :

Pneumatic signals of several inches of water gauge applied to the input will control the output pressure up to 35 PSI in both digital and analog systems. Diaphragm Amplifiers are very suitable for providing pneumatic signals to air-piloted valves and for powering small cylinders. They are also used at fluidic signal levels for providing isolation and in timing circuits.

FEATURES

  • Fast Response
  • Snap-Action
  • Miniature Size

SPECIFICATIONS
Input Leakage @ 1 PSI: Less than 0.003 SCFM
Maximum Input Pressure: 5 PSI
Maximum Supply Pressure:
F-4014-123 and F-4014-128: 35 PSI
F-4014-161, F-4014-163, and F-4014-168: 25 PSI
Operating Temperature: 40 degrees to 120 degrees F. (4 degrees to 49 degrees C.)
Recommended Filtration: 10 micron
Supply Flow: See Typical Supply Characteristics

MATERIALS
Housing: Polysulfone
Diaphragm: Polyurethane
Spring: Beryllium Copper

PORT CONNECTIONS
Straight ports for 1/16″ I.D. tubing

MOUNTING
Panel Mount: Two No. 6 screws are provided

pression d\\'actionnement

123 – 3" +/- 2" H20, 128 – 8″ +/- 3″ H20, 161 – 1″ +/- 1″ H20, 163 – 3″ +/- 2″ H20, 168 – 8″ +/- 3″ H20
Orifice d\'amenage

3.05 mm (0.12"), 4.05 mm (0.16")
Pression d\\'alimentation

0-1.7 bar (0-25 PSI), 0-2.4 bar (0-35 PSI)

Catalogs: