The Manifold Mounted Precision Pressure Regulators are designed to mount directly on pneumatic circuit boards or manifold subplates.
Manifold Mounted Pressure Regulator
R-6000 Series / PR-6000 Series
Price is starting from CHF 44.15
The pressure regulators can currently not yet be ordered via the online store. However, we will gladly accept your order by email and are at your disposal for all your questions.
-
The Manifold Mounted Precision Pressure Regulators have port connections for the supply and output are located on the base of the manifold mounted series regulator.
The Manifold Mounted Regulators are available in two models: The Adjustable Precision Regulator has a 20-turn adjustment range from .5 to 100 PSI. Maximum supply is 150 PSI. Four adjustment ranges are available: 10 PSI, 30 PSI, 60 PSI, and 100 PSI.
The Adjustable Regulator is furnished with an adjustment knob and is also available with an extended 1/4″ shaft to accept an adjusting knob or furnished with an exposed screwdriver adjustment by which the pressure range can be adjusted.
The Preset Precision Regulator is designed to produce a precise output pressure that is preset at the factory, 0.5 to 40 PSI using a 100 PSI supply.
The Preset Regulator is available with a recessed allen wrench adjustment or a removable adjustment knob.
The Unique Modular Dovetail design allows the regulator to be used individually or assembled into a modular combination of pneumatic components.
SPECIFICATIONS
Adjustment Range
Adjustment Model: 0.03 – 6.9 bar (0.5 to 100 PSI)
Preset Model: 0.03 – 2.76 bar (0.5 to 40 PSI)
Maximum Supply: 10.3 bar (150 PSI)
Operating Temperature: 4 to 66 °C (40 to 150 °F)
Recommended Filtration: 5 μm
Effect of Supply Variation: Within 0.007 bar (0.1 PSI) output change with 0.7 bar (10 PSI) supply change (< 1%)
Flow Regulator: Maximum flow 5 SCFM with 6.9 bar (100 PSI) supply
Repeatability: Within 0.007 bar (0.1 PSI) when the supply pressure is turned off and on
Drift: 0.007 bar (0.1 PSI) total drift at 24 °C (75 °F)
Supply Consumption: Within 400 cc/m at 6.9 bar (100 PSI) supply, with a dead-end outputMATERIALS
Housing: Glass filled Celcon
Adjustment Screw: Carbon Filled Nylon
Retaining Ring: Carbon Spring Steel
Stem Assembly: Celcon
Diaphragm: Buna N, Polyurethane
Diaphragm Assembly: Celcon
Springs: Stainless Steel
O-Rings: Buna N, Silicone Nitrile
Valve Seat: PVC
Filter: Stainless Steel 304, Micron size 380
Manifold Mount Screws: ZincPORT CONNECTIONS
Threaded Dovetail: A Modular Dovetail Slide with 10-32 UNF, 18-27 NPT, 1/4-18 NPT thread sizes. The 1/8″ and 1/4″ NPT contain a brass hoop ring insert. The 1/8″ and 1/4″ gauge port is available. During assembly, fittings should be finger tight plus one turn.
Union Dovetail: A Modular Dovetail Slide with a thru hole joining two units together with a common air supply.
Connecting Dovetail: A Modular Connecting Dovetail Slide with no hole joining two units together with no common air supply.
Push-in Fitting Dovetail: Available for six different Tubing sizes (Outside Diameter)
– 4 mm
– 6 mm
– 5/32” (3.97 mm)
– 3/16″ (4.76 mm)
– 1/4” (6.35 mm)
– 5/16” (7.94 mm)MOUNTING
Manifold Mounting: 2.9mm diameter mounting holes, use 4-40 mounting screws.
Wall Mount: Modular Dovetail wall mount with 4.37 mm holes
Mounting Base: An Air Logic manifold mounting base is available. 10-32 UNF threaded input and output ports. -
Order by model number for output range. Specify accessory letters or numbers for the dovetail ports and adjustment style. The regulator is supplied with an INPUT PORT, an OUTPUT PORT, and two BLANK PORTS as standard. Two accessory ports may be ordered. When choosing the port selection the INPUT PORT is the starting point. The remaining ports are then selected counterclockwise.
-
Drawings
3D-Files
Please contact us for other formats.
Catalogs
